NetWaySP4BTWP3

Deploy multiple 90W IP devices in remote locations with or without local power, utilizing fiber infrastructure.

Netway-Spectrum_logo

Altronix NetWaySP4BTWP3 supports up to 90W per port (360W total power) for deploying the latest high-powered IP devices in remote locations. It is equipped with two (2) 1Gb SFP ports to transmit data at long distances and four (4) 802.3bt compliant Ethernet ports. NetWaySP4BTWP accommodates single/multi-mode fiber or composite cable (fiber+copper) to simultaneously deliver power and data from NetWay Spectrum head-end media converters/injectors. Embedded LINQ Technology allows to monitor, control, and report power and diagnostics from anywhere.
NetWaySP4BTWP3

Installation Guide   Data Sheet    More Product Info

Video

Key Features
  • Input
    • Voltage: 115VAC, 60Hz, 3.5A or 230VAC, 50/60Hz, 2A.
    • Input Fuse: 5A/250V
  • Power Output
    • Four (4) 10/100/1000 Mbps Ethernet ports rated at 90W each (360W total power).
    • IEEE 802.3af, 802.3at, 802.3bt compliant.
  • SFP Ports
    • Two (2) Gigabit SFP port.
  • Ethernet Ports
    • Four (4) 10/100/1000 Mbps ports.
    • Connectivity: RJ45, auto-crossover.
    • Wire type: 4-pair CAT5e or higher structured cable.
    • Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation.
  • VLAN
    • Multiple management VLAN assignment.
    • 802.1Q Tagged VLAN.
    • Up to 10 VLAN groups. ID Range 2-4095.

  • Battery Charging
    • 24VDC charging circuit charges LiFePO4 (Lithium Iron Phosphate) or sealed lead acid* or gel type* batteries.
    • Automatic switch over to stand-by battery when AC fails.
    • Failover: Upon AC loss, instantaneous
    • (Batteries are sold separately).
  • Indicators (LED)
    • Individual PoE On LEDs for each port
    • Individual IP Link status, 10/100/1000 Base-T/active LEDs for each port
    • ALOS LED indicates fiber connection for SFP port
    • Heartbeat LED indicates proper operation of the unit
  • LINQ Technology
    • Remote network management allows for camera/device reset and diagnostic monitoring.
    • Provides local and/or remote access to critical information via LAN/WAN.
    • Email and Windows Dashboard Alert notifications report real-time events.
    • Event log tracks history.
  • Temperature
    • Operating (360W): –40ºC to 45ºC (–40ºF to 113ºF).
    • Operating (240W): -40ºC to 55ºC (-40ºF to 131ºF).
    • Operating (180W): -40ºC to 65ºC (-40ºF to 149ºF).
    • Operating (150W): -40ºC to 75ºC (-40ºF to 167ºF).
    • Storage: -40ºC to 85ºC (-40ºF to 185ºF).
    • Relative Humidity: 85% +/-5%.
    • BTU/Hr.(approx.): 122 BTU/Hr.
  • Operating Altitude
    • - 304.8 to 2,000m.

 

Diagram
NetWaySP4BTWP3 Typical Application